Advantages
Self-smoothing.
Dimensionally stable.
Fast drying.
Can be applied by pump.
Cemflow Base S can be pumped to cover an area of 2000 m² per day. Alternatively a coverage of 600m² per day can be achieved when hand applied, depending on manpower, thickness applied and equipment used.
Cemflow Base S is designed as an industrial grade floor topping for upgrading and renovating new and existing internal floors.
Cemflow Base S is supplied as a pre-blended dry powder designed for application between 5 mm to 50 mm (in one application) to provide a finished sound floor.
Applications
it is suitable for use in a wide range of industrial and commercial applications such as:
Warehouses.
Food processing plants.
Industrial floors.
Car parks.
Underfloor heating systems.
Coverage
Cemflow Base S: 1.36 m² @ 10 mm thickness for 25 kg bag mixed with 4.5 litre of clean water.
Cemflow Primer when diluted 3 parts potable water to one part primer:
30 m²/5 litre.
150 m²/25 litre.
| SURFACE PREPARATION | |
|---|---|
| Concrete surfaces must be degreased using degreasing products, torching or any other suitable method which assures the surface is free from any oil traces. | |
| Surfaces should be sound and with no irregularities as they can affect the finish of the applied product. Concrete surfaces are to be mechanically prepared to remove laitance and achieve a at surface, grit blasting or surface pro ling equipment are preferred. Acid etching can be used after consulting with TRFS’s Technical Department. | |
| Surface defects such as voids and blowholes should be repaired before application. Consult TRFS's Technical Department for the best repair material. |
